When hydraulic breaker is not working.

When the hydraulic hammer is not in use for a long period of time, please store it as follows
1) Clean the outside of the hydraulic hammer.
2) Apply anti-corrosion oil after removing the steel pin from the housing.
3) The nitrogen must be released from the nitrogen chamber and pushing the piston into the cylinder.
4) When reassembling, the spare parts of hydraulic hammer should be lubricated and then assembled, such as the chisel, pins and bushes.
5)Keep it in dry place or warehouse, otherwise it may be enter into the water or rain inside the body. It is easier to rust the piston and valve. Once there is rust on the piston, you have to replace the piston.



Scroll to Top
Scroll to Top